Vinci Technologies Centrifugal Extractor
The
centrifugal extractor is designed to spray warm, clean solvent from a still
against the core samples. The centrifugal force causes solvent to flow through
samples displacing and extracting the oil (and water). The speed of rotation can
be selected depending on the permeability and degree of consolidation of the
core. Most common solvents can be used. A solvent recovery still is also
provided to recycle clean and warm solvent into the centrifugal extractor in
closed loop.
Features:
| Core Diameter | up to 2 inches |
| Core Length | up to 3 inches |
| Quantity of Sample | between 6 to 18 depending on the core length |
| Wetted Materials | Stainless Steel, Teflon |
| Centrifuge Speed | up to 3000 RPM |
| Electrical | 220 VAC, 50 Hz, 1500 W |
Benefits:
Centrifugal Extractor
 |
Rapid
and efficient extraction of oil, water and salt from consolidated core
samples |
|
Speed
controller |
|
Rotor
geometry to accommodate the core samples |
|
Solvent
inlet and outlet |
|
Vibration
free chassis |
Solvent Recovery Still
|
Heated
solvent flask |
|
Water
refrigerant for solvent condensation |
| Temperature controller |
