PressureTech2000 TS-300 Two Stage Regulator

Features:

	Maximum 300 bar inlet pressure for new gas cylinder requirements
	Flow co-efficient Cv-0.06
	Based on same features as the LF-300
	High-flow capacity
	Convoluted Inconel diaphragms to provide strength and flexibility
	True metal to metal seal
	Soft seating area perpendicular to flow stream to minimize particle damage
	Standard inter-stage port for relief valve
	Locked tamper proof first stage
	Stainless Steel bonnet as standard
	20 micron filter
	Panel mounted or cylinder assembly
	Outlet pressure change of 0.04 psi for every 100 psi drop in supply pressure
	Maintains set pressure under varying inlet pressure conditions.

Applications:

	Analyzer systems
	Purge and carrier gases
	Instrumentation control
	Pressure test and calibration systems
	Gas cylinder assembly.

Options:

	Elastomeric diaphragm
	Relief valve between two stages
	Two stage cylinder assembly.

Ordering Information
(standard specifications shown):

	Body and wetted parts: 316 Stainless Steel
	Bonnet: 316 Stainless Steel
	Seat: PCTFE
	Connections: 1/4" NPT
	Inlet filter: 20 micron
	O-ring material: Viton
	Operating temperature: -20 degrees C to +70 degrees C
	Proof pressure: 450 bar
	Burst pressure: Inlet: 2200 bar, Outlet: 280 bar
	Inboard He leak rate: 1x10⁸ atm cc/sec He (individual testing available at extra cost)

Note: All regulators have been cleaned and ultrasonically degreased in accordance with ASTM G93-96. Use on Oxygen service is the users responsibility.

*Changes can be made to suit individual needs - please refer to sales office to discuss specific requirements.