Point
of Use Regulator - Model POU-50
|
|
Features:
 |
50 bar inlet pressure |
| Convoluted stainless diaphragm to
provide strength and flexibility |
| True metal to metal seal |
| Seating area perpendicular to flow
stream to minimize particle damage and provide tight shutoff |
| 20 micron retention filter |
| Smooth ergonomic hand wheel. |
|
An economical quality regulator for point of use panels and
workbenches.
|
Applications:
| Analyzer systems |
| GC's |
| Instrumentation control |
| Low pressure test and calibration
systems |
| Laboratories and workbenches |
| Point of use gas distribution systems. |
Options:
|
Shut-off or metering valves |
|
Flow meters |
|
Panels or boxed arrangements. |
 |
|
|
Ordering
Information
(standard
specifications shown):
| Body and wetted parts:
316 Stainless Steel |
| Bonnet:
316 Stainless Steel |
| Seat:
PCTFE |
| Connections:
1/4" NPT |
| Inlet filter:
20 micron |
| O-ring material:
Viton |
| Operating temperature:
-20 degrees C to +70 degrees C |
| Proof pressure:
Inlet: 75 bar, Outlet: 15 bar |
| Inboard He leak rate:
1x108 cc/sec He (individual testing available at
extra cost) |
Note:
All regulators have been cleaned and ultrasonically degreased in
accordance with ASTM G93-96. Use on Oxygen service is the users
responsibility.
*Changes can be made to suit
individual needs - please refer to sales office to discuss specific
requirements. |
Example of
Porting Options:
Model
Ordering Information:
