PressureTech2000 LF-300 Single Stage Regulator

Features:

	300 bar inlet pressure for new gas cylinder requirements.
	Convoluted Inconel X750 diaphragm to provide strength and flexibility
	Diaphragm support - to prevent rupture from over pressurization
	Diaphragm washer to protect against torsional load on diaphragm.
	True metal-to-metal sealing.
	Bottom entry access for ease of servicing.
	Stainless Steel bonnet as standard.
	6 outlet ranges: 0-2, 0-4, 0-8, 0-10, 0-20 and 0-35 bar
	Smooth ergonomic hand wheel.
	PEEK seating area perpendicular to flow stream to minimize particle damage.
	2 Cv options: 0.03 and 0.06
	20 micron filter.

Applications:

	Analyzer systems
	Purge gases
	Instrumentation control
	Pressure test and calibration systems
	Gas cylinder assembly

Options:

	Elastomeric diaphragm
	Dome loaded
	Single stage cylinder assembly
	Panel mounting nut - PT-C-024

Ordering Information
(standard specifications shown):

	Body and wetted parts: 316 Stainless Steel
	Bonnet: 316 Stainless Steel
	Seat: PCTFE
	Connections: 1/4" NPT
	Inlet filter: 20 micron
	O-ring material: Viton
	Proof pressure: 450 bar
	Burst pressure: Inlet: 2200 bar, Outlet: 280 bar
	Inboard He leak rate: 1x10⁸ atm cc/sec He (individual testing available at extra cost)

Note: All regulators have been cleaned and ultrasonically degreased in accordance with ASTM G93-96. Use on Oxygen service is the users responsibility.

*Changes can be made to suit individual needs - please refer to sales office to discuss specific requirements.