PressureTech2000 CYL-300 Cylinder Regulator

Cylinder Regulator Assembly - Model CYL-300

Features:

	Single stage and two stage cylinder regulator assemblies
	Maximum 300 bar inlet pressure for new cylinder requirements
	Convoluted Inconel diaphragm to provide strength and flexibility
	True metal to metal seal
	Bottom entry access for ease of servicing (single stage only)
	Soft seating area perpendicular to flow stream to minimize particle damage
	Stainless Steel bonnet as standard
	Inlet retention filter
	20 micron inlet filter
	Smooth ergonomic
	Optional relief valves, outlet valves and bottle connectors.

For quality gas cylinder regulators made to last, Pressure Tech has created a flexible approach to individual regulator requirements. "Mix and match" your needs against our ordering system.

Ordering Information (standard specifications shown):

	Body and wetted parts: 316 Stainless Steel
	Bonnet: 316 Stainless Steel
	Seat: PCTFE
	Cylinder connections: BS341
	Inlet filter: 20 micron filter
	O-ring material: Viton
	Operating temperature: -20 degrees C to +70 degrees C
	Proof pressure: 450 bar
	Burst pressure: Inlet: 1200 bar, Outlet: 280 bar
	Inboard He leak rate: 1x10⁸ cc/sec He (individual testing available at extra cost)

Note: All regulators have been cleaned and ultrasonically degreased in accordance with ASTM G93-96. Use on Oxygen service is the users responsibility.
*Changes can be made to suit individual needs - please refer to sales office to discuss specific requirements.

Example of Porting Options:

Model Ordering Information:

VINDUM ENGINEERING, INC.
1 Woodview Court
San Ramon, California 94582-2307 U.S.A.
Telephone: +1.925.275.0633
Facsimile: +1.925.275.9697
info@vindum.com

VINDUM ENGINEERING, INC.
Canada
Telephone: +1.403.770.0758 or 281.782.8312
Facsimile: +1.630.845.8437
christa@vindum.com