Digital acquisition and storage of full circumference cores (360 degrees) and slabbed cores in bit true 24-bit color (DigiCore software system)

Core-Log Integration to geological profile by continuous composition of cores with respect to their orientations and depths (CoreLog / TecLog software system)

Depth-Matching with respect to evaluated core gaps

Evaluation of the geological structures with a pickup routine (bedding, joints, faults, veins ...)

Derivation of true depth, strike and dip of structures

Calibration and North-Orientation of the acquired structures in connection with geophysical logs

Grain size distribution and analysis (CoreImageAnalysis (C.I.A.) software system)

Derivation of geomechanical parameters for ground constructions (RQD, FD, FS ...)

Exploration drillings for oil, gas, coal and industrial mineral deposits

Sedimentological investigations

Scientific Deep Drilling Projects

Site investigation for geothermal energy projects

Site investigation for final disposal of radioactive waste

Site investigation for geotechnical applications such as traffic traces

Calibration of geophysical borehole measurements with cores

Geological investigation of underground storage facilities for oil and gas.

DMT CoreScan II, (Length 1.5 x Depth 0.60 x Height 1.15 meters)  Weight: 140 kg

Power Supply:  105 VAC - 235 VAC 50Hz/60Hz; (Pmax) 580 VA

Core length:  Up to 1 meter (full diameter and slabbed cores), optionally up to 1.6 m

Core diameter:  Up to 150 mm (full diameter), up to 250 mm (slabbed)

Resolution:  Up to 40 pixel/mm (up to 1000 dpi)

Acquisition System:  PC Pentium 4 Processor, Operating System: MS Windows XP, 4 GB RAM, 25 GB HD and CD/DVD-Rewriter

Monitor:  19 inch TFT 1600 x 1200 resolution

Archiving:  DVD-CD as "BMP", "TIF" or "JPG"

Digital Camera:  High resolution color camera:  3x6000 Pixel, 24-bit true color, Spectrum: 400 to 700 nm

Horizon 4:  Interface

Ethernet Card (remote station or laptop)